udis Drill Heleti Drilling and Crushing 800W

700–1,000 Watts

Without switch

2 years

Cabled

Available

Available

Available

0 - 2 m

Battery Free

Impact

1. Selecting the correct mode (side switch): A hammer drill typically has 3 or 4 modes: "Feather" symbol (drilling only): for wood and metal (requires a standard drill bit). "Drill bit with hammer" symbol: This is the hammer drill’s primary use for drilling into concrete and walls. "Hammer/chisel" symbol only: For chiseling (removing ceramic tiles or breaking through a section of wall) using a "chisel." 2. Drill Bit Installation The hammer drill uses the SDS-Plus system; no wrench is required. Pull the drill chuck ring back, insert the bit, then rotate it slightly until you hear the "click" of the lock. Make sure it is secure by pulling it outward before operation.

CN