2 Brothers W1209 Digital thermostat Temperature Control Switch DC 12V Sensor Module/arduino raspberry pi

Product description

• Connect the power supply and the load, you can supply to the controller.

• Is displayed as a measured temperature.

• Press the SET button, the display flashes the temperature.

• Press - to set the desired temperature.

• After setting press SET to confirm return.

The controller automatically performs the relay by setting off.

Lights, LED status descriptions.

Indicator: Off The relay is switched off, Always indicate the relay is closed.

LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

The display--as high temperature protection.

Material: Plastic Manufacturer: Other Color: green • Connect the power supply and the load, you can supply to the controller.

• Is displayed as a measured temperature.

• Press the SET button, the display flashes the temperature.

• Press - to set the desired temperature.

• After setting press SET to confirm return.

The controller automatically performs the relay by setting off.

Lights, LED status descriptions.

Indicator: Off The relay is switched off, Always indicate the relay is closed.

LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

The display--as high temperature protection.

Material: Plastic Manufacturer: Other Color: green Product DescriptionWowPartsPro Digital Temperature Control Switch for you is unlike any other digital temperature control switch.

The product can measure from -50 to 100. At the same time, it also a high accuracy,When temperature is 0.1 , the resolution is -9.9 ~ 99.9, other temperature segment is 1, and there is a LCD screen to show you the information, really perfect to use, you will love it! How To Use: Connect the power supply and the load, you can supply to the controller.

Is displayed as a measured temperature.

Press the SET button, the display flashes the temperature.

Press - to set the desired temperature.

After setting press SET to confirm return.

The controller automatically performs the relay by setting off.

Lights, LED status descriptions.

Indicator: Off The relay is switched off, Always indicate the relay is closed.

LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay.

The display--as high temperature protection.

SpecificationTemperature range:-50 - 110.Temperature control mode : ON / OFF.

Resolution : When temperature is 0.1 , the resolution is -9.9 ~ 99.9, other temperature segment is 1Control accuracy: 0.1 .

Hysteresis accuracy : 0.1 .

Refresh rate:0.5S.

S&gt

High temperature protection : 0-110 .

Supply voltage: DC 12V.

SStatic current:&lt

= 35MA, attract current &lt

= 65MA.

Output voltage:DC 12V .

SOutput power:20A relay .

Measurement input : NTC (10K 0.5%) Waterproof Sensor.

Environmental requirements:-10 ~ 60 Humidity 20% -85%.

Package Included 1 x W1209 Digital thermostat Temperature Controler -50 - 110°C 12V sensor .

Additional info

• Sold by
  ZUILI TRADING
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: tr-B07N6NW3Y4