3XR Universal Remote Keyless Entry System with Central Locking, Trunk Release & Car Locator Function

yes. its universal

No instalation videos.to install the 3XR central locking or remote locking system, start by disconnecting the vehicle’s battery to ensure safety. Mount the control unit securely under the dashboard near the fuse box or glove compartment using screws or cable ties. Connect the red wire from the control unit to a constant 12V power source, such as the car battery or fuse box, and connect the black wire to a clean ground point on the car’s metal body. Identify the vehicle’s lock and unlock signal wires, typically located inside the driver-side door panel. Connect the blue wire from the kit to the lock signal and the green wire to the unlock signal by splicing them into the vehicle’s wiring. If the system supports indicator blinking, connect the indicator wires (often yellow or white) to the left and right turn signal wires. Optionally, connect the door trigger wire to the door switch if the unit supports door status detection. After completing all wiring, reconnect the car battery and test the remote controls to ensure they lock and unlock the doors correctly and trigger any indicator lights if wired. Finally, secure all connections with electrical tape and organize wires using cable ties to prevent interference or damage during vehicle operation.

This is not a mistake on our part. This is an error on the part of the delivery partner.Please Contact Trendyola Customer Support.