almihomi Car Dent Repair Kit, Paintless Dent Removal Tools with Dent Puller, Glue Gun & Accessories Kit

Usage Instructions: 1️⃣ Clean the dent surface – Wipe the dented area thoroughly to ensure there is no dust, dirt, or grease. 2️⃣ Prepare the glue gun – Insert a glue stick into the glue gun, connect to a power source, and preheat for 5–10 minutes. 3️⃣ Apply the glue tab – Select a suitable glue puller tab according to the dent size. Apply heated glue onto the tab, then quickly place it in the center of the dent. Hold it firmly until it sticks. 4️⃣ Allow glue to set – Let the glue cool for 5–8 minutes (less than 10 minutes; slightly shorter cooling time in winter). 5️⃣ Pull the dent – Attach the bridge puller, align it over the tab, and gently pull until the dent is lifted. Repeat as needed until the dent disappears. 6️⃣ Remove glue residue – After repair, use hot water to clean off glue from the car surface and puller tabs. 7️⃣ Level raised points – If there are small raised spots left, align with the leveling pen and gently tap with the rubber hammer until smooth.

CN