Aqua 2 HP Swimming Pool Pump

Black

Instructions for Use – 2 HP AQUA Swimming Pool Pump 1. Installation: Install the pump on a stable, level surface and connect the suction and discharge pipes correctly. 2. Prime the pump: Fill the pump strainer housing completely with clean pool water before starting. Never run the pump dry. 3. Open valves: Make sure the suction and return valves are open before switching on the pump. 4. Electrical connection: Connect the pump to the correct electrical supply according to the rating plate. Electrical installation should be performed by a qualified technician. 5. Start the pump: Switch on the pump and check that water begins circulating normally through the filtration system. 6. Check for leaks: Inspect all pipe connections and the pump housing after startup. 7. Strainer cleaning: Switch OFF and isolate the electrical supply before opening the transparent lid. Remove and clean the basket, then reinstall it correctly.