Free shipping
Choice 1PCS ESP-WT32-ETH01 WiFi BT Module Embedded Serial Port to Ethernet WiFi BT Wireless Development Boa
Checkout Discount 22% Off
At checkout
35.96 SAR
46.10 SAR
Trendyol's commitments
Easy and free return in 15 days.
Highlighted features:
Choice 1PCS ESP-WT32-ETH01 WiFi BT Module Embedded Serial Port to Ethernet WiFi BT Wireless Development Boa features
Seller information
Choice 1PCS ESP-WT32-ETH01 WiFi BT Module Embedded Serial Port to Ethernet WiFi BT Wireless Development Boa reviews
Product details

Additional info
- A maximum of 10 units of this product can be ordered. Trendyol reserves the right to cancel orders over 10 units.
- Barcode No: 3675264050039
Choice 1PCS ESP-WT32-ETH01 WiFi BT Module Embedded Serial Port to Ethernet WiFi BT Wireless Development Boa features
Safety information
Product description
Color:1PCS
Product Features:
1. The ESP-ETHO1 is an embedded serial-to-Ethernet module based on the ESP series.
2. The module integrates an optimized TCP/IP protocol stack, making it easy for users to connect embedded devices to the internet, significantly reducing development time and costs.
3. The module is compatible with both half-pad and through-hole connector designs. The universal board width allows for direct soldering to boards, soldering connectors, and use on breadboards, facilitating user adaptation in diverse scenarios.
4. The ESP series IC is a dual-mode SoC with integrated 2.4GHz Wi-Fi and Bluetooth, offering excellent functionality and performance.
5. The module offers superior RF performance, stability, versatility, reliability, and ultra-low power consumption.
Features:
Wi-Fi:
Protocol: 802.11 b/g/n/e/i (802.11n, up to 150 Mbps; A-MPDU and A-MSDU aggregation, supporting 0.4 ms guard interval)
Frequency Range: 2.4-2.5 GHz
Bluetooth:
Protocol: Compliant with Bluetooth v4.2 BR/EDR and BLE standards
RF: NZIF receiver with -97 dBm sensitivity
Hardware:
Ethernet Port: RJ45, 10/100 Mbps, auto-negotiating crossover and direct connections
Serial Port Baud Rate: 80-5,000,000
Onboard Flash: 32 Mbit
Operating Voltage: 5V or 3.3V (selectable)
Operating Current: Average 80 mA
Power Supply Current: Minimum 500 mA
Operating Temperature Range: -40°C to +85°C
Software:
Wi-Fi Mode: Station/softAP/SoftAP+station/P2P
Wi-Fi Security: WPA/WPA2/WPA2-Enterprise/WPS
Encryption: AES/RSA/ECC/SHA
Firmware Update: Remote OTA update via network
Software Development: SDK for user development
Network Protocol: IPv4, TCP/UDP
IP Acquisition Method: Static IP, DHCP (default)
Simple Transparent Transmission: TCP Server/TCP Client/UDP Server/UDP Client
User Configuration: AT+ Command Set
Dimensions: 63mm*25mm*16mm
Power Supply Voltage:
The module can be powered by either 5V or 3V3.
Power Supply Mode:
Users can freely choose the following based on their needs:
1) Through-hole (Soldered Pin Header): âš« Powered by Dupont cable connection; âš« Powered by breadboard connection;
2) Half-pad (Soldered directly to the board): Powered by the user's board.
Instructions:
Power-on Instructions:
If using Dupont cables: Find the 3V3 or 5V power input port and connect the corresponding voltage. The indicator light (LED1) will illuminate, indicating successful power-up.
Indicator Instructions:
âš« LED1: Power indicator. Lights up when power is on normally.
âš« LED3: Serial port indicator. Lights up when data is flowing on RXD2 (IO5).
âš« LED4: Serial port indicator. Lights up when data is flowing on TXD2 (IO17).
4.3 Usage Instructions
Three usage methods are available for users to choose from:
1) Through-hole (solder pin header): Connect using Dupont cables;
2) Through-hole (solder pin header): Use on a breadboard;
3) Half-pad: Users can directly solder the module to their own board. Network Port Indicator Light Description
Green: Connection status indicator. Lights green when properly connected to the network. Yellow: Data indicator. Flashes when the module is receiving or sending data, including when the module receives a network broadcast packet.
Product List:
1 x Module
2 x Pin Headers



