Choice 2Switch 1Receiver 16A WiFi Tuya Smart Switch Wireless Remote Control Timer Switch Compatible Smart L

✅✅Attention:

✅The wireless switch and receiver cannot be manually paired and need to be paired in the app. Therefore, it is necessary to first connect to the app and then complete the pairing in the app.

✅Wifi receiver parameters

1.Working voltage: AC90-250V,16A 60HZ/50HZ

2.WIFI: IEEE 802.11 b/g/n 2.4Ghz

3.RF Working frequency: 433MHZ

4.Size:88x39x23mm

5:Support APP: Tuyasmart & SmartLife APP

✅433mhz Wireless switch

1, working voltage: DC 3V(CR2032 3V Battery)

2, working frequency:433MHZ

3, size: 53* 53 * 13mm

Wiring method diagram:Note:

Both its input and output terminals need tobe connected to Live wire and Neutral wireOpen the protective cover with screws

Universal Compatibility

Designed to be universally compatible, ensuring a wide range of device compatibility.

Wi-Fi Compatibility

Seamlessly integrates with Wi-Fi networks, offering convenient remote control via smart devices.

Smart Life APP Support

Utilizes the Smart Life APP for easy setup and management of your smart switch.

Voice Control Compatibility

Works with Alexa and Google Home, allowing for hands-free operation with simple voice commands.

Countdown/Timing Function

You can set a countdown for humidifiers, microwaves, coffeemachines and more. The device will stop automatically. Don'tworry about the device working all the time

Sharing function

Main account has the exclusive permissions,one clickto share the permissions with the whole family. let the family enjoy the fun of smart life!

3 Kinds Of Restart State

1.Turn off the lights, turn on the lights, and operate before the memory

2.No need to worry about the status of the lights when going out

⭐Remote control distance 0-50m

Never worry about getting up and turning off the lights in winter

⭐Feel free to place, multiple fixing methods

✅RF433 wireless remote control switchmatching method(After successful
WiFi pairing)

1.Open the app ,Click
“Settings”

2. Select again"RF Remote
Control Settings"

3.Click “Add”

Then press the wireless remote control switch
within 10 seconds for code pairing operation;

After successful pairing, the RFremote can control theon/off switch via RF433.