Product description
What should be considered when applying a sticker? Application mark the surface to be applied in advance.
go over the back surface on the table with a plastic card (such as a credit card-bank card) by pressing it.
carefully separate a portion of it to leave on the clear side. Stick the part you separated so that it comes to where you marked it.
pull the white paper down slowly. Pass over the part you want it to stick to with the plastic card, pressing it down.
when doing this process, be careful not to leave any air bubbles. Apply this process to the entire product.
gently pull the transparent transfer paper from the corner.
separate the entire transparent transfer from the product. Product features - our products are manufactured using imported foils and high-resolution printing technique. - they are sent completely protected in a protective roll cardboard. They are not affected by water and sun. It is a product that you can easily apply on the wall or cabinet. It is long-lasting and self-adhesive. it does not leave a mark when removed. it does not fade or peel off. (if the plaster on your wall is not well done, if there is no primer paint underneath or if a poor quality paint has been used, there is a possibility of regional destruction. If you do not trust the quality of your wall, you can soften the sticker by heating it with a blow dryer while removing it.) Please make sure the surface you want to stick is clean and dry.