GENERAL F405 Flight Controller with 55A 4-in-1 ESC 3-6S Lipo Input Flying Control Stack Board for FPV Drone

Product description

Technical data: Item Type:Flight Controller F405 Controller Parameters: Distance between installation holes: approx.

30.5 x 30.5 mm / 1.2 x 1.2 inches.

MCU: For STM32F405 OSD: For Beta Flight OSD Power consumption: 3-6S Lipo BEC Output: 5V 3A, 12V 2.5A 4-in-1 ESC Parameters: Continuous current: 55 A.

Peak current: 60 A.

Application: For FPV Drone Package list: 1 x flight controller.

1 x regulator.

1 x capacitor.

2 x connection cables.

4 x screws.

4 x nuts.

8 x spacers Easy Welding Equipped with some soldering pads to support welding LED strip and GPS, allowing you to operate the drone model conveniently at night and check at any time.

Standard Size The distance of the installation holes is 30.5 x 30.5 mm, the opening is 4 mm, suitable for most on the market.

You can choose the model suitable for you.

4 in 1 Regulator This kit is equipped with a 4-in-1 regulator, with a continuous current of 55A x 4 and a sudden current of 60A, which lasts 10 seconds, supports the Dshot300600 PWM control signal.

Stable Flight This flight controller features a stable STM32F405-MCU, ICM42688 and a large motorpad, allowing you to easily weld the motor and provide a stable flying experience.

EASY CONNECTION Built-in Type-C socket, you can connect the flight control stack to the computer to change the required data, support 3-6S Lipo power input, 5V3A, 12V2.5A BEC output.

Additional info

• Sold by
  zhejiangkexungongmaoyouxiangongsi
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: B0DG8WVRGN-01