Generic 1000UF 25V capacitor

Product description

Capacitance: 1,000 µF (±20% typical tolerance) Rated DC Voltage: 25 V DC Mounting / Package: Through-hole radial lead aluminum electrolytic (dimensions will depend on manufacturer/series) Operating Temperature Range: Often something like -40 °C to +105 °C (depending on series) Features: Polarized (positive and negative terminals must be observed) Typical Applications: Bulk decoupling, power rail smoothing, filter capacitors in power supplies, audio amplifiers, etc.

Features &amp

Notes Because the voltage rating is 25 V, you must ensure that in your circuit the capacitor is never exposed to more than that (including any voltage spikes).

According to industry advice, you should give a margin between operating voltage and capacitor voltage rating for reliability.

shdrcap.

com +2 Electrical Engineering Stack Exchange +2 The Equivalent Series Resistance (ESR) and ripple-current rating are key parameters especially if the capacitor is on a power rail with switching or high current ripple.

All About Circuits +1 The lifetime of an electrolytic capacitor depends on ambient temperature, applied ripple current, the rated voltage vs actual voltage, etc.

Higher temperatures shorten life.

DigiKey TechForum +1 Ensure the physical size (diameter, height) fits your layout

smaller footprints or low-profile versions may be available depending on series.

The tolerance of the capacitance (e.

g.

, ±20%) is often acceptable for decoupling/filter use

precision timing applications might need tighter specs.

Because electrolytic capacitors are polarized, connecting them with wrong polarity can cause failure or damage.

Typical Example Description (for your specification) Aluminum Electrolytic Capacitor – 1,000 µF, 25 V DC Capacitance: 1,000 µF ±20% Rated Voltage: 25 V DC Operating Temperature: -40 °C to +105 °C (check datasheet) Mounting Style: Radial lead through-hole Polarized: Yes (Observe polarity) Applications: Power supply rail smoothing, bulk storage, decoupling, audio equipment, general electronics filtering Features: Good cost-performance for moderate voltage and capacitance

must match ripple current and ESR for the application Notes: Do not exceed the voltage rating

derate for margin

choose correct package size

verify ESR/ripple ratings especially in high load or switching applications.

Additional info

• Sold by
  sg966
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 1000UF25V