Generic for iPhone 8 Plus Screen Replacement 5.5 inch LCD White

Product description

Note: 1 Please make sure that you correctly identify your mobile phone before purchasing.

2 The package contains maintenance tools.

3 This iPhone 8 plus screen replacement kit does not contain the home button, front camera and ear speaker sensors, so please transfer and install them from the old screen.

Installation Steps: 1. Power off the phone.

2. Remove the bottom screw.

3. Lift the screen with a suction cup until there is a gap.

4. Open the back shell with the triangular joystick.

5. Open the screen and separate it from the back cover.

6. Remove and label all screws from the battery connector bracket.

7. Disconnect the battery cable, display and touch the cable.

8. Disassemble the old screen home button assembly.

Installation Precautions: 1. Do not press the four corners, and be careful when tightening the screws, otherwise it will cause the internal glass to break.

2. Make sure that each screw is installed back to the original hole.

3. Be careful with the flexible cable connector when installing.

4. Please check the LCD and make sure that the flexible cable is in good condition and there is no debris on the connector.

5. Do not bend it excessively or tear it apart with excessive force.

6. Please disconnect the mobile phone battery flexible cable before installing the new screen, this is very important.

Otherwise the screen will not open.

Additional info

• Sold by
  coznnz
  .
• A maximum of 1 units of this product can be ordered. Trendyol reserves the right to cancel orders over 1 units.
• Barcode No: CofLt8gTPfBC7dE0iyTGqVjph0jIgH4nb2FAA