Generic Fuel Injector Tester and Cleaner Tool Kit, 4 Pulse Modes with 2 Size Adapters for Efficient Injector

Product description

Product Description: • This kit can help diagnose injector problems and can test injectors one by one to help confirm stalled/leaking/fired out conditions.

• This kit has 4 pulse signal output modes, and the user can choose any one as needed.

Using the vehicle's 12V car battery as the power source, the continuous operation mode can identify injectors while the engine is off.

The mode lock function defends consistency when testing fuel injectors.

Attention: • Automotive fuel injector cleaning kit is only suitable for gasoline engines, not for diesel engines.

• Short-circuit protection: When the injector is damaged or the pulse output is short-circuited, the power indicator light will flash to indicate.

• Cleaning: Carburetor cleaner/injector sprayer and 12V DC battery power supply need to be prepared in advance additionally.

Electrical Specifications: Power Supply: 12V battery / DC 12V (recommended 2A) power adapter Working Condition: 0°C-40°C

Relative humidity ≤80%.

Size: 4.9*2.8*1 IN (main part) Material: ABS Storage Condition: -20°C-50°C

Relative humidity ≤85% Weight: 10.6 OZ Injector Stuck, Blocked, Leaked or Burnt-Out Incomplete Fuel Combustion Engine Idling Instability and Start Difficulty Weak Vehicle Acceleration and Slow Car Movement Operating Instructions: • Turn off the engine of the car.

• De-plug the wires of the injector of the car to be measured, and then connect the two pulse output terminals of the instrument with the injector of the car.

• Connect the red clip of the instrument to the positive pole of the 12V car battery and the black clip of the instrument to the negative pole of the car battery.

• Press “MODE SET” to select the desired pulse signal output mode.

The screen will display the currently selected mode.

• After selecting the desired pulse signal output mode, press the “PLUSE” key, the instrument will output pulses to the injector to be started.

The output pulse signal indicator lights up.

• After the test is completed, if you need to repeat the test, press the “PLUSE” key again

If you want to change the pulse mode, press the “RESET” key to select the desired mode, and then test the automobile injector again.

Different Modes Are Explained In Detail: • Mode “1”: Single pulse mode.

In this mode, when the “PLUSE” key is pressed, the instrument will send out a pulse with a width of about 255 ms.

• Mode “2”: Short pulse mode.

In this mode, when the “PLUSE” key is pressed, the instrument will emit 50 pulses with a pulse width of approximately 7 milliseconds.

• Mode “3”: Long pulse mode.

In this mode, when the “PLUSE” key is pressed, the instrument will emit 100 pulses with a pulse width of approximately 3.5 milliseconds.

• Mode “4”: Continuous pulse mode.

In this mode, when the “PLUSE” key is pressed, the instrument will continuously output pulses at a rate of approximately 50 pulses per 1450 ms.

The pulse rate is about 50 pulses every 1450 ms.

The pulse width is about 7 ms.

• Pressing the “PLUSE” key again will terminate the pulse output.

• Always turn off the car engine before using this instrument.

• Do not smoke/ignite close to the car.

• Do not spill automobile fuel on hot engine parts.

• Use this instrument only in a ventilated area, and do not inhale exhaust fumes from automobiles or vapors from flying fuel.

• Do not get close to the rotating/moving parts of any automobile, and do not touch the hot parts of any automobile.

• Do not short-circuit the positive and negative terminals of the car battery.

• Do not touch any automobile parts with dangerous voltages.

• Always observe the warnings/cautions/related maintenance instructions in the vehicle maintenance manual.

• Wear qualified goggles.

• All disconnected car connections should be restored correctly after completion of the test.

Additional info

• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Sold by
  luoyuanmaoyi
  .
• Barcode No: CofLt8gTPfBC7cR9yq3GxIAX8IdLPLjYjshhi