Generic Motor Speed Controller AC 220V 400W Electric Governor

Product description

Specification: Product model: US-52 Matching motor power: 300W

400W

500W (Optional) Working power supply: AC220V 50/60HZ (Voltage fluctuation range ±10% Ue) Use environment: -10~+50°C Relative humidity: &lt

90% Speed range: 90-1400r/min 50HZ, 90-1700r/min 60HZ Package list: 1 * Motor Speed Controller Installation and usage method: The controller has 6 lines, the black line is the main line of the motor, the red and white are the capacitor secondary lines, the two blue lines are the speed feedback line, and the green line is the ground line.

Turn off the power, connect according to the wiring diagram and confirm that the line connection is correct, do not arbitrarily modify it

Set the external speed knob to &quot

0&quot

before use to avoid transient high currents and damage the controller.

This product is controlled by generator feedback voltage, and the control line is divided into two lines: &quot

blue&quot

and &quot

yellow&quot

When the governor is connected to the motor and found that the or speed does not meet the requirements, the US-52 adjusts the side trimmer potentiometer (speed setting adjustment).

To change the direction of motor operation, simply replace the jumper &quot

CCW&quot

and &quot

CW&quot

on the wiring on the back of the controller.

* When changing direction, you must change the motor after it has completely stopped running.

1) Select COM and CW short circuit, then the motor rotates clockwise

2) Select COM and CCW to short, then the motor rotates counterclockwise.

The action switch only controls the motor to operate or stop, and does not use the power supply for interruption.

If it is not used for a long time, please turn off the power.

Additional info

• Sold by
  QFASFF
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: TY3_35fBQKJAiYmtXBmaMXyD-W3JWFg_5kiHb7G0