Generic Sikaflex Pro-3, Grey, High Performance Multipurpose Elastic Floor Joint Sealant, Moisture-Curing, In

Product description

Sikaflex PRO-3 is a sealant for concrete and precast joints used as a general purpose sealant for sealing joints in building construction such as movement, expansion and construction/isolation joints around windows and doors, facades, claddings.

Technicals informations: Density :env 1.45 kg/l.

Ambient air temperature: +5°C min.

/ +40°C max.

(min.

3°C above dew point temperature).

Curing Rate: env 3mm/24h (23°C / 50% r.

h.

Skin Time: env 65min (23°C / 50% r.

h.

Tooling Time: env 55min (23°C / 50% r.

h.

Application method: The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles.

Sikaflex PRO-3+is supplied ready to use.

After the necessary substrate preparation, insert a suitable backing rod to the required depth and apply any primer if necessary.

Insert a foil pack into the sealant gun and extrude Sikaflex Construction+ into the joint making sure that it comes into full contact with the sides of the joint and avoid any air entrapment.

Sikaflex PRO-3+ sealant must be firmly tooled against the joint sides to ensure adequate adhesion.

It is recommended to use masking tape where exact joint lines or neat lines are required.

Remove the tape within the skin time.

Use a compatible tooling agent to smooth the joint surfaces.

Do not use tooling products containing solvents.

If Sikaflex PRO-3+ is dry-tooled it shows a slightly structured, concrete-like surface.

If it is wettooled it shows a smooth surface.

Additional info

• Sold by
  aseelhome
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: CofLt8gTPfBC7dLKfPesfvxD91WRQuHhDSK24