Free shipping
GLOTRENDS Vertical GPU Mount Kit, PCIe 4.0 Riser Cable, White
No reviews yet.
407.08
SAR
(incl. VAT)
Free shipping
Delivery address
Select your address, find out the delivery date!
International delivery
Trendyol's commitments
Easy and free return in 15 days.
Payment methods
Highlighted features:
Available campaigns
Applied at checkout
AAAUUjj
8.5
Seller information
Shoppers also viewed
GLOTRENDS Vertical GPU Mount Kit, PCIe 4.0 Riser Cable, White reviews
No reviews yet.
Product details
Product description
• FITS BOTH 2-SLOT AND 3-SLOT GPUS – The steel base spans three expansion bays, so whether your card is a slim 2-slot or a thicker 3-slot flagship, it seats square and secure.
Note on 4-slot cards: this mount does not support 4-slot ultra-thick graphics cards – if your GPU occupies four bays, please choose a 4-slot vertical kit instead.
• TRUE PCIE 4.0 SPEED, MEASURED NOT CLAIMED – The bundled Riser cable is tested at ~26GB/s real throughput against the 32GB/s Gen4 x16 theoretical ceiling.
Fully backward compatible with PCIe 3.0 systems.
• ONE-PIECE STEEL PLATE, NO GPU SAG – A single stamped iron plate (0.65 kg) replaces the welded multi-piece frames that flex under flagship cards.
It carries the full weight of a 2- or 3-slot GPU with no droop or twist, and 3 included foam pads damp vibration and lock the bracket tight against the chassis.
• READ THIS BEFORE ORDERING – Full Gen4 bandwidth needs all of the following: Intel 11th Gen or Ryzen 5000 Series and above CPU, and GPU requirements GeForce RTX 40 Series or AMD Radeon RX 7000 Series, etc.
Missing any one of them? You still get a working mount, just at Gen3 speed – no adapter, no error.
• Please Check Your Case Before Ordering: Requires a PC case with a FULL-OPEN 7- or 8-slot PCIe/PCI bracket panel (no rails or dividers between slots).
Cases with bridged/fenced slots — including most NZXT H-series, Corsair and Lian Li O11 layouts — may need the rear panel modified or may not fit.
Measure your rear panel before purchase
message us with your case model and we will confirm compatibility.
Material: Iron Manufacturer: glotrends Color: white Size: 180mm • FITS BOTH 2-SLOT AND 3-SLOT GPUS – The steel base spans three expansion bays, so whether your card is a slim 2-slot or a thicker 3-slot flagship, it seats square and secure.
Note on 4-slot cards: this mount does not support 4-slot ultra-thick graphics cards – if your GPU occupies four bays, please choose a 4-slot vertical kit instead.
• TRUE PCIE 4.0 SPEED, MEASURED NOT CLAIMED – The bundled Riser cable is tested at ~26GB/s real throughput against the 32GB/s Gen4 x16 theoretical ceiling.
Fully backward compatible with PCIe 3.0 systems.
• ONE-PIECE STEEL PLATE, NO GPU SAG – A single stamped iron plate (0.65 kg) replaces the welded multi-piece frames that flex under flagship cards.
It carries the full weight of a 2- or 3-slot GPU with no droop or twist, and 3 included foam pads damp vibration and lock the bracket tight against the chassis.
• READ THIS BEFORE ORDERING – Full Gen4 bandwidth needs all of the following: Intel 11th Gen or Ryzen 5000 Series and above CPU, and GPU requirements GeForce RTX 40 Series or AMD Radeon RX 7000 Series, etc.
Missing any one of them? You still get a working mount, just at Gen3 speed – no adapter, no error.
• Please Check Your Case Before Ordering: Requires a PC case with a FULL-OPEN 7- or 8-slot PCIe/PCI bracket panel (no rails or dividers between slots).
Cases with bridged/fenced slots — including most NZXT H-series, Corsair and Lian Li O11 layouts — may need the rear panel modified or may not fit.
Measure your rear panel before purchase
message us with your case model and we will confirm compatibility.
Material: Iron Manufacturer: glotrends Color: white Size: 180mm
Additional info
- A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
- Sold by .
- Barcode No: tr-3AMLYDY1JGW
Safety information
Product safety information