Leylak Store Iron-On Shiny Stone Applique

Yes, sir, you can have it sewn, it will hold more firmly.

Hello sir, fits all sizes.

Application on clothing 1- Lay the clothing flat and clean on a surface. 2-Place the applique with its stone side up, so that the adhesive/ironed side will come to the fabric. 3-Put a teflon ironing cloth or a thin cotton cloth over it. 4-Use the iron without steam. 5-About 150 for the first try ° Start around C and press for 10–15 seconds. 6- Drag the iron; proceed by pressing and lifting. 7-Apply heat evenly, especially at the edges and areas with stones. 8- Allow it to cool completely, then gently remove the carrier film if present. 9-If a few stones are lifting, apply heat for 5-10 seconds again through the cloth.

Hello sir, the length is 22 cm

Hello sir, yes it is possible, you can also cut it with scissors and make other shapes.

Hello sir, Our product adheres to these fabrics: *Cotton fabrics *Linen *Denim *Thick satin *Gabardine *Thick polyester fabrics. On these fabrics, adhesion may be weak or additional stitching may be required: *Chiffon *Tulle *Organza *Thin silk *Very flexible lycra fabrics.

Both are possible, sir, you can sew it, it will be more durable.