Liqui Moly Internal Engine Cleaner | Engine Flush Plus – 300ml

Product description

Cleanliness starts from inside the engine.

Changing the oil is an essential step, but old deposits may remain inside the passages and parts of the engine.

LIQUI MOLY Engine Flush Plus is a highly effective cleaning fluid added to the old engine oil before changing it, to help dissolve oil-soluble and insoluble deposits and suspend them within the fluid, so they are drained with it when the oil is changed.

Key Features: Effective internal cleaning: Helps remove accumulated deposits and impurities inside the engine oil circuit.

Preparation for new oil: Leaves internal engine parts cleaner before filling with new oil.

Practical application: A 300ml package is sufficient for engines containing up to 6L of oil, according to LIQUI MOLY.

Wide use: Suitable for petrol and diesel engines, and with commercially available oils.

How to Use: Add the contents of the package to the old engine oil at operating temperature.

Run the engine at idle for approximately 10 minutes only, without driving the car.

Stop the engine and drain the old oil completely.

Replace the oil filter and fill with new oil according to the ed specification and quantity for the car.

Product Details: Brand: LIQUI MOLY Product: Engine Flush Plus Type: Internal engine cleaner before oil change Suitable engines: Petrol and Diesel Capacity: 300ml Country of manufacture: Germany Important Warning: Do not use as engine oil and do not leave inside the engine after cleaning.

Not suitable for motorcycles with a wet clutch.

Follow package instructions and car manual, and consult a specialized technician if in doubt about its suitability or if there are mechanical faults.

A smart step before new oil... for more precise cleaning and better engine care.

Additional info

• Sold by
  The spot
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: PMP14PPKXCLAKI1Q68