Liqui Moly Radiator Cleaner

Product description

Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms.

When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage.

Radiator Cleaner removes deposits containing oil and lime and ensures that the engine runs reliably and at the optimum temperature.

It disperses sludge, removes oil and greasy residue, performs chemical conversion of lime, has neutral behavior on rubber and plastics, and is compatible with antifreeze.

Does not contain aggressive acids or alkalis.

For all coolant and heating systems in water-cooled engines.

300 ml is sufficient for 10 l of coolant (dosage 1:33).

Compatible with all conventional coolant additives and antifreezes (with the exception of “low conductivity” coolants).

Application: Add contents to the cooling water.

Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min.

After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions.

The content (300 ml) is sufficient for 10 l of coolant (dosage 1:33).

Other information: Store free of frost.

The treated product contains biocides as protective agents.

Contains a mixture of 5-chloro-2-methyl-2 H-isothiazol-3-one [EC no.

247-500-7] and 2-methyl-2 H-isothiazol-3-one [EC no.

220-239-6] (3:1).

Danger H 318 Causes serious eye damage.

EUH 208 Contains Reaction mass of 5-chloro-2-methyl-2 H-isothiazol-3-one and 2-methyl-2 H-isothiazol-3-one (3:1).

May produce an allergic reaction.

Additional info

• Sold by
  Brent
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: PMP6IB69RURGXZ2421