NETTENS 12-Piece Fish Keychain Epoxy Mold Epk-723

12-Piece Fish Keychain Epoxy Mold Epk-723

- our epoxy mold is made of high-grade silicone, you can use our mold for making epoxy pendant and keychain with peace of mind.
- especially epoxy pendant and keychains can be designed in colors and patterns to remind you on special days such as the birthday of your loved ones and give them as a gift.
- you can add glitter, stickers, colorants, flowers, stones, etc. inside to customize our epoxy mold.
- with our epoxy mold with holes, you can make necklace, keychain of different patterns and colors, and make the products into sales.
- epoxy molds are heat resistant and easy to separate products.
- it is an epoxy mold that can be removed after the product is dry, with a high degree of heat, which can be maintained in a hot environment of an average of 200 to 300 degrees, which allows the epoxy casting to dry quickly.
- it is precious for us to be a part of your beautiful days.

__t13__our product will not emit any odor during interaction. the odor our product emits during interaction is not harmful to health. if you wish, you can use gloves against any allergic reactions that may occur on your skin.

__t14__:__t15____t16__depth: 0.5 cm__t17__mold weight: 115 gr__t18__color: transparent__t19__quantity: 1__t20__package contents: __t21__

__t22__- keep away from sunlight and uv rays. __t23__- store on a flat surface at room temperature. __t24__- keep away from excessive heat and products like butane lighters. __t25__- store in a cool environment.

__t26__- our silicone molds have multiple uses if used correctly.While the recommended usage is 15-20, this can increase with correct use, but the lifespan can decrease with incorrect use.Therefore, we recommend that you carefully read and follow the usage instructions. __t27__ - it should be fed with quality mold separators before use. __t28__ - do not remove from the mold before the epoxy dries.If you want your epoxy mold to be smooth, please wait for it to dry. if hardening does not occur after 24 hours, put the product in the freezer part of the refrigerator and wait for your mold to freeze.Afterwards, you can easily remove the product without damaging the mold. __t30__ - be careful not to spill over the edges of the mold during the casting process.In cases of overflow, you can wipe the product with a wet wipe (make sure it is not alcohol-based).It will not cause any damage to the product.T31 - never clean silicone molds with alcohol and solvent-based products and never touch the inside of the mold with your fingers.__t32__- to prevent wear and tear on your molds, let the mixture you prepared in pet plastic or silicone sit for 1 hour.Thanks to the chemical reaction that will occur in this way, your mold will be safe and no damage will occur.Using mold release agent or max varnish will protect the mold's gloss and ensure a long service life.__t34__- please stay away from knives and other incisive object.__t35__- if you are a freshman, we recommend that you search the internet for videos or articles on how to make resin.

Pour 1 part hardener into a container containing 2 parts resin and mix slowly until no air bubbles remain. (mix thoroughly for 2-3 minutes, moving from right to left, left to right, and bottom to top.) during mixing, ensure a homogeneous mixture by touching the mixing rod to the bottom and edges of the container. let the resulting homogeneous mixture rest for 5 minutes, then pour it into the mold and allow it to dry. the mixture will become touchable by hand after approximately 6 hours. it will fully harden within 12 hours and reach a scratch-resistant glass-like state in 48 hours. once the epoxy material has completely cured inside the mold, you can easily remove the product by gently flexing the mold at the edges.

__t40__- you can clean your mold as if you were washing dishes with not too hot water and dish soap, with peace of mind.__t41__- to be suitable for continuous use, you should always keep your mold clean__t42____t43__