Pattex Silicon Pl 150 Beige - High Quality, Solvent-Based, 380g

Product description

Here are the technical specifications arranged in clear and direct points: Product Technical Information File 📋 Technical Specifications: Brand: Pattex.

Model: PL 150 (Construction Adhesive).

Composition / Base: Solvent technology.

Weight / Package Type: Cartridge, 380 grams.

Color: Beige.

Usage Environment: Suitable for indoor and outdoor use.

Environmental Resistance: Water, vibration, and UV resistant.

Open Time: Approximately 10 minutes at room temperature (23°C).

Full Curing Time: 48 hours for final adhesion strength.

Final Adhesion Strength: Up to 6 N/mm².

Gap Filling Capacity: Can fill gaps up to 10 mm deep.

Temperature Range: During Use: Can be applied in temperatures from -10°C to +35°C.

Heat Resistance after Curing: From -20°C to +80°C.

Coverage Rate: Approximately 300 g/m², or 11 linear meters when applied with a 6 mm bead.

Compatible Materials: Bonds strongly to bricks, ceramics, concrete, dry boards, plywood, stone, MDF, metals, and rigid PVC (excluding acrylic, PE, and PPTE).

💡 Features and Usage: Provides high initial tack (Instant Tack) ensuring immediate material adhesion.

For best results, at least one surface should be porous, and surfaces should be clean and free of oils or dust.

For non-porous surfaces and heavy loads: The &quot

double adhesion&quot

method is ed by pressing the two surfaces together, then pulling them apart for 5-10 minutes to allow the solvent to evaporate, then pressing them together again firmly.

Additional info

• Sold by
  Ronak Middle East
  .
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: PL150
• Origin: BE