POELSAN Drip Irrigation Reverse Locking Elbow 20x20 (50 Pieces)

Product description

New blue series coupling sleeve poelsan pipe connection adapters should be kept away from hard and sharp objects during storage and installation. If the installation is laid under the ground, it should be covered with sand to protect it from hard and sharp objects

Adapters that are definitely damaged should not be used. In order to get the maximum efficiency from poelsan pipe connection adapters, the tees and elbows should be at 90 degrees. ° , other adapters 180 ° Should be mounted on the pipe to make an angle

Connections that create different angles will cause stresses on the adapter, reducing the life of the installation. In threaded connections, right? Ten bands should be used

Te? Ten tape should be wrapped in the direction of tightening, enough to prevent water leakage to the adapter

Over-tightening the nut during assembly causes additional stress on the adapter

The product, which has been subjected to additional stress in this way, cannot be expected to meet the guaranteed pressure values. Therefore, it should not be forgotten that the product is plastic and should only be tightened to the strength that will ensure the sealing. Visual control adapters must be visually checked to detect damaged adapters during installation. Leakage control after the installation of the installation, water must be supplied to the installation at test pressure and the sealing condition must be determined. Applications that may cause leakage the thread sizes of poelsan pipe connection adapters are produced in accordance with the standards. The other metal or plastic material used is not suitable, te? Insufficient use of the tape, excessive tightening of the product or improper installation during assembly results in damage to the product's threads, failure to chamfer the pipe during assembly and thus damage to the oring or its displacement, the ovality in the pipes is beyond the given tolerance values (± 0. 5 mm) more different, incorrect mounting of the nut, not tightening enough or tightening too much causing the product to crack, installing the adapter by tightening the nut without combining the pipe holder with the oring holder may cause leakage in your installation

Featuresmade of high quality polypropylene raw material that is resistant to impacts

± 0 on pipes It prevents problems that may occur due to size differences up to 5 mm or ovality, thanks to its conical tightening feature. It does not allow algae and bacteria growth because it does not transmit uv rays. The ring is made of rubber and provides high sealing. Inner surfaces are homogeneous and non-porous It does not contain any foreign substances that can change the smell and taste of water

Our female products provide high sealing at variable temperatures in the long term thanks to the corrosion-resistant metal ring used

Additional info

• The selling price on Trendyol already includes the export-related costs.
• Sold by
  HDGRUPSULAMA
  .
• Made in Türkiye
• A maximum of 5 units of this product can be ordered. Trendyol reserves the right to cancel orders over 5 units.
• Barcode No: 1000210254043
• Origin: TR