PUNTO Deco Swan Sink Faucet

The Punto Deco Swan Swivel-Spout Sink Faucet is manufactured under the Punto brand with the Eczacıbaşı Artema guarantee. It comes with a 5-year warranty from Artema.   CHROME PLATED OUTLET LENGTH 130 MM OUTLET HEIGHT 197 MM SPECIAL CARTRIDGE WITH CERAMIC DISCS SWIVEL SPOUT Product Code:  A41092 Warranty Period: 5 years, guaranteed by Eczacıbaşı Artema. Box Weight: 1.26 kg Finish: Chrome Before Installation: • Review the instruction manual before installing the faucet. • Keep the instruction manual for the duration of the faucet’s warranty period. • Keep your faucet in its original packaging until it is installed in its final location. • If the water pressure exceeds 5 bar, prolonged operation at this pressure will shorten the life of your faucet. Therefore, use a pressure-reducing regulator at the plumbing inlet. • Install a filter at the inlet of the plumbing system to which you will connect your faucet. • Flush the pipes by letting a small amount of water run through them before connecting your faucet to the plumbing system. • Use a filtered diverter valve to connect sink and kitchen faucets to the plumbing system. • Do not use chrome-plated faucets in places such as spas. • Do not leave your faucet installed for long periods in buildings under construction. Construction mortar, lime, and other materials may spill onto the faucet. Additionally, chemicals present in the air can combine with humidity to cause corrosion on the faucet’s surface. If such materials have fallen onto and adhered to the faucet during construction, do not scrape them off with hard objects. If the faucet will remain in a building under construction for an extended period, cover it with a bag to isolate it from the environment. • Your faucet is designed to operate at ambient temperatures between 5°C and 65°C. Take the necessary precautions to ensure your faucet is not affected by freezing, especially in ambient conditions below 5°C. During Installation: • During installation, do not allow tools—especially pipe wrenches—to come into contact with the faucet’s surfaces. • Use an installation template when laying the plumbing to ensure that bathroom, sink, and kitchen faucets are mounted to the wall easily and properly. • Never use a wrench when attaching the flexible connection hoses of sink and kitchen faucets to the body. The sealing element (O-ring) located at the end of the hoses where they enter the body is sufficient to ensure a leak-tight seal. Make sure the hoses are properly installed on the body. • After connecting your faucets to the plumbing, open the valve and check for leaks at the faucet’s connection points. If there is a leak at the connection points,